AMA 1510JC6

~ E 347–17 AWS/ASME SFA – 5.4:
1.4551 Comparable No. of material
E 19 9 Nb R 23 DIN 8556:
E 19 9 Nb R 12 prEN 1600:

Application/properties:

Electrode for welding of stabilized austenitic stainless Cr-Ni-steels and cast steels, as well as for stainless or heat resistant non-scaling up to +800°C. Fine droplet metal transfer, good wash-in of joint sides, finely-rippled bead surface, easily removable slag, easy arc striking and restriking .

Weld metal analysis in % (typical values):

C	Mn	Si	Cr	Ni	Nb
0.025	0.8	0.9	19	10	0.4

Mechanical Properties of all-weld metal:

(single values are typical values)

Tensile Strength ( N/mm ²)	Yield Strength 0.2% ( N/mm ²)	Elongation A5 (%)	Impact energy(j) ISO - V 20°C+
620	420	33	60

OCV>50V

Welding Parameters
Diameter (mm)	Length (mm)	Amperage (A)
2.5	250	45 – 80
3.25	300-350	70 – 120
4.0	350	100 – 150
5.0	350	140 – 210

Materials:

DIN EN standard	1.4301 X5CrNi 18 10; 1.4541 X6CrNiTi 18 10; 1.4550 X6CrNiNb 18 10; 1.4303 X5CrNi 18 12; 1.4308 G-X6CrNi 18 9; 1.4310 X12CrNi 17 7; 1.4319 X5CrNi 17 8
Other Standard	AISI 347; 321; 302; 304; 304L; 304LN; ASTM A296 Gr.CF 8 C; A157 Gr.C9; A320 Gr.B8C

Rebaking:

required at 350°C to 400°C for 2 hours.

Coated electrodes for manual welding

AMA 1510JC6

Weld metal analysis in % (typical values):

Mechanical Properties of all-weld metal:

Materials:

Rebaking:

Contact

Factory sales office

Phone