AMA 1509JC

~ E 316 L–17 AWS/ASME SFA – 5.4:
1.4430 Comparable No. of material
E 19 12 3 L R 23 DIN 8556:
E 19 12 3 L R 12 prEN 1600:

Application/properties:

Electrode for welding of austenitic stainless Cr-Ni-Mo-steels or cast steels having and extra low carbon content. Suitable for operating temperatures up to +400°C. Fine droplet metal transfer, good wash-in of joint sides, finely-rippled bead surface, easily removable slag. Easy arc striking and restriking .

Weld metal analysis in % (typical values):

C	Mn	Si	Cr	Ni	Mo
0.025	0.8	0.9	18.5	12	2.7

Mechanical Properties of all-weld metal:

(single values are typical values)

Tensile Strength ( N/mm ²)	Yield Strength 0.2% ( N/mm ²)	Elongation A5 (%)	Impact energy(j) ISO - V 20°C+
600	420	33	60

OCV>50V

Welding Parameters
Diameter (mm)	Length (mm)	Amperage (A)
2.5	250	45 – 80
3.25	300	70 – 120
4.0	350	100 – 150
5.0	350	140 – 210

Materials:

DIN EN standard	1.4401 X5CrNiMo 17 12 2; 1.4404 X2CrNiMo 17 13 2 G-X2CrNiMoN 18 10; 1.4429 X2CrNiMoN 17 13 3; 1.4406 X2CrNiMoN 17 12 2; 1.4408 G-X5CrNiMo 18 10; 1.4436 X5CrNiMo 17 13 3; 1.4581 G-X5CrNiMoNb 18 10; 1.4435 X2CrNiMo 18 14 3; 1.4571 X6CrNiMoTi 17 12 2; 1.4580 X6CrNiMoNb 17 12 2; 1.4583 X10CrNiMoNb 18 12
Other Standard	S31653; AISI 316L; 316Ti; 316Cb

Rebaking:

required at 350°C to 400°C for 2 hours.

Coated electrodes for manual welding

AMA 1509JC

Weld metal analysis in % (typical values):

Mechanical Properties of all-weld metal:

Materials:

Rebaking:

Contact

Factory sales office

Phone