ERNiCr – 3
9011m   ama 9011m

Nicle base TIG Welding Wire

AMA 90-11M

AWS/ASME SFA-5.14: ERNiCr - 3


GMAW solid wire for welding of nickel-base alloys, high-temperature and creep resisting steels, heat resisting and cryogenic materials, low-alloyed problem steels and dissimilar joints. Ferritic austenitic joints is for service temperatures above +300°C or for applications where a post weld heat treatment is required. Suitable for pressure vessel fabrication for the service temperature range -196°C to +550°C, otherwise resistant to scaling up to +1200°C. Not susceptible to embitterment. Resistant to thermal shocks, corrosion resistant, fully austenitic. Low coefficient of thermal expansion.(between C-steels and austenitic CrNi (Mo) steel)

Weld metal analysis in % (typical value):

C Mn Ni Cr Nb+Ta
<0.05 3 rest 20.5 3.5

Shielding gas: DIN EN 439-I1 (100% Ar)
DIN EN 439-I3 (Ar + He)

Mechanical properties of all-weld metal: shieelding gas : l1

Tensile Strength
( N/mm )
Yield Strength
( N/mm )
A5 (%)
Impact energy (J)
20°C       -196°C+
Heat Treatment
>640 >400 >35 160         80 AW

AW : As welded


DIN Standard 2.4816 NiCr 15 Fe; 2.4817 LC-NiCr 15 Fe; X8Ni9
Other Standard Alloy 600, Alloy 600 L

Delivery: Only wound wire – reel on:
weight: 15 kg
diameter : 0.8 – 1.6 mm
Note : other weight & sizes are produced upon customers request