En
FaER 308 LSi
3012m ama 3012m
Stainless steel MIGMAG Welding Wire
Application/properties:
Austenitic stainless wire electrode in extra low carbon quantity for MIG/MAG welding of unstabilized corrosion resistant CrNi steels. Resistant to intergranular corrosion up to 350˚C, non-scaling up to 800˚C if subjected to air or oxidizing combustion gases.
Analysis of wire electrode% (typical value):
| C | Si | Cr | Mn | Ni |
|---|---|---|---|---|
| <0.03 | 0.65 - 1 | 19.5 - 22 | 1 - 2.5 | 9 - 11 |
Shielding gas: DIN EN 439-M13 (0-3% O2, Balance Ar)
DIN EN 439-M12 (0-5% CO2, Balance Ar)
Mechanical properties of all-weld metal:
|
Tensile Strength ( N/mm 2 ) |
0.2% Proof Stress ( N/mm 2 ) |
Elongation Lo = 4d % |
Impact energy (J) ISO - V 25°C |
|---|---|---|---|
| >520 | >320 | >35 | >80 |
Material:
| DIN Standard | 1.4306 X2CrNi19 11 G-X2CrNiN 18 9; 1.4301 X5CrNi 18 10; 1.4311 X2CrNiN 18 10; 1.4312 G-X10CrNi 18 8; 1.4541 X6CrNiTi 18-10; 1.4546 X5CrNiNb 18-10; 1.4550 X6CrNiNb 18 10; 1.4303 X4CrNi 18 12; 1.4306 X2CrNi 19 11; 1.4308 G-X6CrNi 18 9; 1.4310 X12CrNi 17 7; 1.4319 X5CrNi 18 7 |
| Other Standard | AISI 304, 304L, 304LN, 302, 321, 347; ASTM A157 Gr. C9; A320 Gr. B8C |
Delivery: Only wound wire – reel on :
weighr : 15 kg
diameter : 0.8 – 1.6 mm
Note :other weight & sizes are produced upon custumers request.
