E70 C 6M H4
210m ama 210m

flux-cored-arc-welding
Application/properties:
Metal cored wire , suitable for welding in all position. The weld metal has good mechanical properties at -40°C. This wire can be used in root pass with back penetration. It can be used for automatic multi-run welding.
All weld metal analysis (typical value) %:
Gas | C | Mn | Si | Ni |
---|---|---|---|---|
M21 | 0.04 | 1.7 | 0.5 | - |
Shielding gas: DIN EN 439 M 21 (15-25% CO2, Balance Ar)
Mechanical properties of all-weld metal (Typical):
Tensile Strength ( N/mm 2 ) |
Yield 0.2% Strength ( N/mm 2 ) |
Elongation Lo = 5d% |
Impact energy (J)) ISO -V 20°C -40°C- |
Heat Treatment |
---|---|---|---|---|
580 | 485 | 28 | 105 80 | AW |
540 | 450 | 28 | 100 75 | SR |
AW: As Welded
SR: Heat treatment at 620°C for 2 hour. The heating and cooling speed is 50°C/h
Main application:
Shipbuilding, pipe work, building and structures, pressure vessels
Delivery: coil in diameter : 1 , 1.2 , 1.4 , 1.6 , 2.4 mm & weight 15 kg
Note: other weight & sizes are produced upon customers request