E 11018–M–H4
1432n ama 1432n

Welding electrode for fine-grained structural steels
AMA 1432N
AWS/ASME SFA-5.5: | E 11018–M–H4 |
DIN 8529 : | E Y 69 75 Mn 2 NiCrMo B H5 |
EN 499 : | E 69 5 Mn2NiCrMo B 4 2 H5 |
Application/properties:
Electrode for producing crack-free and tough welded joints. Weld metal is extremely metallurgical purity having very low hydrogen content. Welds are of X-ray quality.
Weld metal analysis in % (typical values):
C | Mn | Si | Cr | Ni | Mo |
---|---|---|---|---|---|
0.06 | 1.80 | 0.50 | 0.35 | 2.20 | 0.40 |
Mechanical Properties of all-weld metal:
(single values are typical values)
Tensile Strength ( N/mm 2 ) |
Yield Strength ( N/mm 2 ) |
Elongation A5 (%) |
Impact energy (J) ISO - V 20°C -60°C+ |
---|---|---|---|
800 - 960 | >700 | > 16 | 120 60 |
Welding Parameters | ||
---|---|---|
Diameter (mm) | Length (mm) | Amperage (A) |
2.5 | 350 | 65 – 92 |
3.25 | 450 | 90 – 135 |
4.0 | 450 | 140 – 185 |
5.0 | 450 | 180 – 240 |
Materials:
DIN Standard | TStE 620 V, TStE 690 V; EStE 620 V, EStE 690 V |
EN Standard | S620 QL – S690 QL; S620 QL1, S690 QL1 |
Rebaking:
required at 300°C to 350°C for 2 hours