En
FaE Fe 6
1105v ama 1105v
Hard coating electrode
Application/properties:
Rutile type electrode with coating for manufacturing and repairing high speed cutting tools.
Weld metal analysis in % (typical values):
| C | Mn | Si | Cr | Mo | V | W |
|---|---|---|---|---|---|---|
| 0.9 | 0.50 | 0.50 | 4.20 | 8.50 | 0.90 | 1.10 |
Mechanical Properties of all-weld metal:
(single values are typical values)
| HRC Hardness | ||
|---|---|---|
| As - Welded | After prescribed heat treatment (a) | After annealing (b) |
| 50 - 64 | 62 - 66 | 25 - 30 |
| Heat treatment | |||
|---|---|---|---|
| Hardening: Quenching temperature | Quenching agent Oil, dry air, hot bath | Tempering: Twice one hour (air cooling) | Annealing (oven cooling) |
| 1180-1240°C | 450°C - 500°C | Up to 510°C - 540°C | 2-4 hour at 820 - 850°C |
| Welding Parameters | ||
|---|---|---|
| Diameter (mm) | Length (mm) | Amperage (A) |
| 2.5 | 350 | 70 – 100 |
| 3.25 | 350 | 100 – 150 |
| 4.0 | 350 | 130 – 180 |
Materials:
Manufacturing and repairing of cutting tools, e.g. for turning, planning, milling, reaming, drills, etc.
Caution :
In order obtain optimum results, deposit three layers one on top of the other. Before welding, preheat the work piece up to 600°C-700°C and maintain this temperature during welding. Weld at the lowest possible.
Do not weld the AMA 1105V electrode if the coating is damaged.
