En
FaER 100S-G
8015m ama 8015m
Low alloy Mig / Meg welding wire
Application/properties:
Medium-alloyed wire electrode for MAG welding of high strength fine grain structural steels. The wire is suited for joint welding in boiler, pressure vessel, pipeline, and crane construction. Wire features good ductility and crack resistance in spite of its high strength.
Analysis of wire electrode% (typical value):
| C | Si | Mn | Ni | Cr | V | Mo |
|---|---|---|---|---|---|---|
| 0.1 | 0.6 | 1.6 | 1.4 | 0.3 | 0.05 | 0.25 |
Shielding gas: DIN EN 439-M2 1 (15-25% CO2, Balance Ar)
DIN EN 439-C1 (100% CO2)
Mechanical properties of all-weld metal: Shielding gas : M21 :
|
Tensile Strength ( N/mm 2 ) |
Yield Strength ( N/mm 2 ) |
Elongation A5 (%) |
Impact energy (J) ISO - V 20°C -40°C+ |
Heat Treatment |
|---|---|---|---|---|
| 750 - 880 | >650 | >16 | >80 >47 | As - Welded |
AW : as – welded
Material:
| DIN Standard | StE 550 to StE 690; EStE 620; EStE690; 20MnMoNi5 5 |
| EN Standard | S380N to S500N; S380NL to S500NL; S500NC to S550NC |
| ASTM Standard | ASTM A517 Gr. A, B, C, E, F, H, J, K, M, P; A225 Gr. C; A633 Gr. E; A572 Gr. 65 |
Delivery: Only Copper coating , wound wire – reel on:
weight: 15 kg
diameter : 0.8 – 1.6 mm
Note : other weight & sizes are produced upon customers request
