~ E 318–17
1511jc6 ama 1511jc6

Special welding electrode for stainless and heat-resistant steels

AMA 1511JC6

AWS/ASME SFA – 5.4: ~ E 318–17
Comparable No.of material: 1.4576
DIN 8556: E 19 12 3 Nb R 23
prEN 1600: E 19 12 3 Nb R 12

Application/properties:

Electrode for welding of stabilized austenitic stainless Cr-Ni-Mo steels or cast steels. Suitable for operating temperatures up to +400°C.Fine droplet metal transfer, good wash-in of joint sides, finely-rippled beat surface, easily removable slag. Easy arc striking and restriking.

Weld metal analysis in % (typical values):

C Mn Si Cr Ni Mo Nb
0.025 0.8 0.9 18.5 12 2.7 0.4

Mechanical Properties of all-weld metal:

(single values are typical values)

Tensile Strength
( N/mm )
Yield Strength 0.2%
( N/mm )
Elongation
A5 (%)
Impact energy(j)
ISO - V
20°C+
630 450 30 60

OCV>50V

Welding Parameters
Diameter (mm) Length (mm) Amperage (A)
2.5 250 45 – 80
3.25 300 - 350 70 – 120
4.0 350 100 – 150
5.0 350 140 – 210

Materials:

DIN EN standard 1.4401 X5CrNiMo 17 122; 1.4406 X2CrNiMoN 17 122; 1.4408 G-X6CrNiMo 1810 ; 1.4436 X5CrNiMo 17 13 3; 1.4581 G-X5CrNiMoNb 18 10 ; 1.4571 X6CrNiMo Ti 17 12 2; 1.4580 X6CrNiMoNb 17 12 2; 1.4583 X 10CrNiMoNb 18 12
Other Standard AISI 316L, 316Ti, 316Cb

Rebaking:

required at 350°C to 400°C for 2 hours.