En
FaER 80S-G ER80S-Ni1
8012m ama 8012m
Low alloy Mig / Meg welding wire
Application/properties:
Medium-alloyed wire is suitable for MAG welding of atmospheric corrosion resistant steels and structural steels. Weld metal have good toughness and mechanical properties.
This wire can be use with Co2 or Ar-Co2 mixed gases.
Analysis of wire electrode% (typical value):
| C | Mn | Si | Ni | Cr | Cu |
|---|---|---|---|---|---|
| 0.07 | 1.1 | 0.7 | 0.8 | 0.15 | 0.3 |
Shielding gas: DIN EN 439-M2 1 (15-25% CO2, Balance Ar)
Mechanical properties of all-weld metal:
|
Tensile Strength ( N/mm 2 ) |
Yield Strength ( N/mm 2 ) |
Elongation A4 (%) |
Impact energy (J) ISO - V 40°C -46°C- |
|---|---|---|---|
| 620 | 530 | 24 | 60 50 |
Material:
| DIN Standard | St 37-2 to St 60-2; St 52-3 Cu 3; WTSt 37-2 |
| EN Standard | S235JR; S235JRW; S355JRW; S355J2G3 Cu |
| ASTM Standard | ASTM A36, A283 Gr. B, C |
Delivery: only Copper coating wound wire – reel on :
weight : 15 kg
diameter: 1-2 mm
Note : other weight & sizes are produced upon cutomers request
