En
FaER 316 L
3013m ama 3013m
Stainless steel MIGMAG Welding Wire
Application/properties:
Austenitic stainless wire electrode in extra low carbon quantity for MIG/MAG welding of unstabilized corrosion resistant Cr Ni Mo steels. Resistant to intergranular corrosion up to 400˚C.
Analysis of wire electrode% (typical value):
| C | Si | Cr | Mn | Ni | Mo |
|---|---|---|---|---|---|
| <0.03 | 0.3 - 0.65 | 18 - 20 | 1 - 2.5 | 11 - 14 | 2 - 3 |
Shielding gas: DIN EN 439-M13 (0-3% O2, Balance Ar)
DIN EN 439-M12 (0-5% CO2, Balance Ar)
Mechanical properties of all-weld metal:
|
Tensile Strength ( N/mm 2 ) |
0.2% Proof Stress ( N/mm 2 ) |
Elongation Lo = 4d % |
Impact energy (J) ISO - V 25°C |
|---|---|---|---|
| >520 | >320 | >30 | >80 |
Material:
| DIN Standard | 1.4401 X5CrNiMo17 12 2; 1.4404 X2CrNiMo 17 13 2 G-X2CrNiMoN 18 10; 1.4429 X2CrNiMoN 17 13 3; 1.4406 X2CrNiMoN 17 12 2; 1.4408 G-X5CrNiMo 18 10; 1.4436 X5CrNiMo 17 13 3; 1.4581 G-X5CrNiMoNb 18 10; 1.4435 X2CrNiMo 18 14 3; 1.4571 X6CrNiMoTi 17 12 2; 1.4580 X6CrNiMoNb 17 12 2; 1.4583 X10CrNiMoNb 18 12 |
| Other Standard | S31653; AISI 316L, 316Ti; 316Cb |
Delivery: Only wound wire – reel on :
weighr : 15 kg
diameter : 0.8 – 1.6 mm
Note :other weight & sizes are produced upon custumers request.
