E 316 L–16
1460jb ama 1460jb

Special welding electrode for stainless and heat-resistant steels

AMA 1460JB

AWS/ASME SFA – 5.4: E 316 L-16
Comparable No. of material 1.4430
DIN 8556 : E 19 12 3 L R 26
prEN 1600: E 19 12 3 L R 12

Application/properties:

Electrode for welding of austenitic stainless Cr-Ni-Mo-steels or cast steels having and extra low carbon content. Suitable for operating temperatures up to +400°C. Fine droplet metal transfer, good wash-in of joint sides, finely-rippled bead surface, easily removable slag. Easy arc striking and restriking.

Weld metal analysis in % (typical values):

C Mn Si Cr Ni Mo
0.025 0.8 0.9 18.5 12 2.7

Mechanical Properties of all-weld metal:

(single values are typical values)

Tensile Strength
( N/mm )
Yield Strength 0.2%
( N/mm )
Elongation
A5 (%)
Impact energy(j)
ISO - V
20°C+
600 420 33 60

OCV>70V

Welding Parameters
Diameter (mm) Length (mm) Amperage (A)
2.5 250 45 – 80
3.25 350 70 – 120
4.0 350 100 – 150
5.0 350 140 – 210

Materials:

DIN EN standard 1.4401 X5CrNiMo 17 12 2; 1.4404 X2CrNiMo 17 13 2 G-X2CrNiMoN 18 10; 1.4429 X2CrNiMoN 17 13 3; 1.4406 X2CrNiMoN 17 12 2; 1.4408 G-X5CrNiMo 18 10; 1.4436 X5CrNiMo 17 13 3; 1.4581 G-X5CrNiMoNb 18 10; 1.4435 X2CrNiMo 18 14 3; 1.4571 X6CrNiMoTi 17 12 2; 1.4580 X6CrNiMoNb 17 12 2; 1.4583 X10CrNiMoNb 18 12
Other Standard S31653; AISI 316L; 316Ti; 316Cb

Rebaking:

required at 350°C to 400°C for 2 hours.