En
FaE 316 L–15
1338jb ama 1338jb
Special welding electrode for stainless and heat-resistant steels
AMA 1338JB
| AWS/ASME SFA – 5.4: | E 316 L–15 |
| DIN 8556 : | E 19 12 3L B20+ |
| PreEN 1600: | E19 12 3L B42 |
| Comparable No. of material | 1.4430 |
Application/properties:
Basic electrode for welding of austenitic stainless Cr-Ni-Mo steels having an extra low carbon content, as well as for temperatures up to +400°C. This electrode has a stable arc.
Weld metal analysis in % (typical values):
| C | Mn | Si | Cr | Ni | Mo |
|---|---|---|---|---|---|
| 0.025 | 1 | 0.4 | 18.5 | 11.5 | 2.7 |
Mechanical Properties of all-weld metal:
(single values are typical values)
|
Tensile Strength ( N/mm 2 ) |
Yield Strength 0.2% ( N/mm 2 ) |
Elongation A5 (%) |
Impact energy(j) ISO - V 20°C+ |
|---|---|---|---|
| 600 | 420 | 35 | 75 |
| Welding Parameters | ||
|---|---|---|
| Diameter (mm) | Length (mm) | Amperage (A) |
| 2.5 | 250 | 45 – 80 |
| 3.25 | 350 | 70 – 120 |
| 4.0 | 350 | 100 – 150 |
| 5.0 | 350 | 140 – 210 |
Materials:
| DIN EN standard | 1.4401 X5CrNiMo 17 12 2; 1.4404 X2CrNiMo 17 13 2 G-X2CrNiMoN 18 10; 1.4429 X2CrNiMoN 17 13 3; 1.4406 X2CrNiMoN 17 12 2; 1.4408 G-X5CrNiMo 18 10; 1.4436 X5CrNiMo 17 13 3; 1.4581 G-X5CrNiMoNb 18 10; 1.4435 X2CrNiMo 18 14 3; 1.4571 X6CrNiMoTi 17 12 2; 1.4580 X6CrNiMoNb 17 12 2; 1.4583 X10CrNiMoNb 18 12. |
| Other Standard | S31653; AISI 316L; 316Ti; 316Cb |
Rebaking:
required at 300°C for 2 hours.
