Application/properties: electrode for producing crack-free and tough welding joints; weld metal recovery is approx 115%. Smooth and clean welds blending into base metal without undercut. Good gap bridging properties, Welds are X-ray quality. suitable for depositing layers on steels having higher carbon content (up to 0.4).
Weld metal analysis in % (typical values):
P
S
Si
Mn
C
< 0.02
< 0.02
0.55
1.2
0.07
Mechanical Properties of all-weld metal: (Single values are typical values)
Impact energy (J)
ISO-V
Elongation
A5 (%)
Yield Strength
(N/mm2)
Tensile Strength
(N/mm2)
-30°C
+20°C
90
140
> 22
> 420
500-640
Welding Parameters
Amperage (A)
Length (mm)
Diameter (mm)
65 – 90
350
2.5
100 – 140
450
3.25
140 – 190
450
4.0
190 – 250
450
5.0
260 – 340
450
6.0
Materials:
DIN Standard
St 37-2 to St 60-2; St 37-3 to St 52-3; St 37.0 to St 52.0; St 37.4 to St 52.4; StE 210.7 to StE 360.7; StE 210.7 TM to StE 360.7 TM; St 35.8 to St 45.8; HI; HII; 17Mn4; GL-A 36 to GL-E 36; StE 255 to StE 355; WStE 255 to WStE 355; TStE 255 to TStE 355; TT ST 35 N; GS-38; GS-52
EN Standard
S235JR to E335; S235J2G3 to S355J2G3; P235T1 to P355T1; P235T2; P355T2; L210 to L360NB; L290MB to L360MB; P235G1TH; P255G1TH; P235GH; P265GH; P295GH; S355G1S to S355G3S; S255N to S355N; P255NH to P355NH; S255NL to S355NL
ASTM Standard
A27 a. A36 Gr. all; A214; A 242 Gr. 1-5; A 266 Gr. 1, 2, 4; A283 Gr. A, B, C, D; A285 Gr. A, B, C; A 299 Gr. A, B; A328; A366; A515 Gr. 60, 65, 70; A516 Gr. 55; A570 Gr. 30, 33, 36, 40, 45; A 572 Gr. 42, 50; A606 Gr. all; A607 Gr. 45; A656 Gr. 50, 60; A668 Gr. A, B; A907 Gr. 30, 33, 36, 40; A841; A851 Gr. 1, 2; A935 Gr. 45; A936 Gr. 50
