En
FaE 7016–A1–H8
1181nc ama 1181nc
Welding electrode for creep resistant steels
AMA 1181NC
| AWS/ASME SFA – 5.5: | E 7016–A1–H4 |
| DIN 8575 : | E Mo B 20+ |
| EN 1599 : | E Mo B 4 2 H5 |
Application/properties:
Basic electrode is suitable for boiler tanks subjected to operating temperature up to 500°C. Its weld metal contains Molybdenum has a good mechanical properties.
Weld metal analysis in % (typical values):
| C | Mn | Si | Mo | S | P |
|---|---|---|---|---|---|
| 0.08 | 0.9 Max | 0.4 | 0.5 | <0.02 | <0.02 |
Mechanical Properties of all-weld metal:
(single values are typical values)
|
Tensile Strength ( N/mm 2 ) |
Yield Strength ( N/mm 2 ) |
Elongation 5*d(%) |
Impact energy (J) ISO - V 20°C -20°C+ |
|---|---|---|---|
| >510 | > 390 | 25 | 120 60 |
| Welding Parameters | ||
|---|---|---|
| Diameter (mm) | Length (mm) | Amperage (A) |
| 2.5 | 350 | 60 – 90 |
| 3.25 | 350 - 450 | 90 – 140 |
| 4.0 | 350 - 450 | 140 – 190 |
| 5.0 | 450 | 190 – 250 |
Materials:
| DIN Standard | St 37-3 to St 52-3; St 37-2 to St 60-2; ST 35.8 to St 45.8; StE 320.7 to StE 415.7; StE 255 to StE 500; 17 Mn 4; 19Mn 5; 15Mo3; TStE 255 to TStE 500. |
| EN Standard | S355J2G3; E295; E335; P255G1TH; L320 to L415NB; L320MB to L415MBM; S255N to S500N; P295GH; P310GH; 16Mo3; 15NiCuMoNb5, 20MnMoNi4-5; 17MnMoV6-4; S255NH to S500NH; S255NL to S500NL. |
| ASTM Standard | A204 Gr.A, B, C; A217 Gr.WC1; A213 Gr.T2; A355 Gr.P1; A182M Gr.F1; A204M Gr.A, B, C; A250 Gr.T1 APl Spec. 5 L: X 52, X 56, X 60. |
Rebaking:
required at 300°C to 350°C for 2 hours.
