En
FaE 7016 – H8
1007f ama 1007f
Alkaline electrode for welding non-alloy steels
AMA 1007 F
| AWS/ASME SFA – 5.1: | E 7016 – H8 |
| DIN 8529 : | E Y 42 55 Mn B H5 |
| EN 499 : | E 42 5 B 41 H5 |
Application/properties:
Multi-purpose electrode for assembly work, workshop and repair welding; also approved for rail joint welding. Smooth and clean weld blending into base metal without undercut. Good gap bridging properties. The electrode has a stable and concentrated arc and good suitability for AC welding. It is specially suited for root pass and positional welding. Welds are of X-ray quality.
Weld metal analysis in % (typical values):
| C | Mn | Si |
|---|---|---|
| 0.08 | 1.3 | 0.45 |
Mechanical Properties of all-weld metal:
(single values are typical values)
|
Tensile Strength ( N/mm 2 ) |
Yield Strength ( N/mm 2 ) |
Elongation A5 (%) |
Impact energy (J) ISO - V 20°C -51°C+ |
|---|---|---|---|
| 500 – 640 | > 420 | > 22 | 180 80 |
| Welding Parameters | ||
|---|---|---|
| Diameter (mm) | Length (mm) | Amperage (A) |
| 2.5 | 350 | 60– 90 |
| 3.25 | 350 - 450 | 90– 140 |
| 4.0 | 350 - 450 | 135– 190 |
| 5.0 | 350 - 450 | 190– 260 |
| 6.0 | 350 - 450 | 300 – 380 |
Materials:
| DIN Standard | St 37-2 to St 60-2; St 37-3 to St 52-3; St 37.0 to ST 52.0; St 37.4 to ST 52.4 ; StE 210.7 to StE 360.7; StE 210.7 TM toStE 360.7 TM; St 35.8 to St 45.8; HI; HII; 17mn 4; GL-A 36 to GL-E 36; StE 255 to StE 355; WStE 255 to WStE 355; TStE 255 to TStE 355; TT ST 35 N; GS-38; GS-52 |
| EN Standard | S235JR to E335; S235J2G3 to S355J2G3; P235T1 to P355T1; P235T2; P355T2; L210 to L360NB; L290MB to L360MB; P235G1TH; P255G1TH; P235GH; P265GH; P295GH; S355G1S to S355G3S; S255N to S355N; P255NH to P355NH; S255NL to S355NL. |
| ASTM Standard | A27 a.A36 Gr.all; A214; A242 Gr. 1-5; A266 Gr. 1, 2, 4; A283 Gr. A, B, C, D; A285 Gr. A, B, C; A299 Gr.A, B; A328; A366; A515 Gr.60, 65, 70; A516 Gr.55; A570 Gr.30, 33, 36, 40, 45; A 572 Gr.42, 50; A606 Gr. all; A607 Gr.45; A656 Gr.50, 60; A668 Gr. A, B; A907 Gr.30, 33, 36, 40; A841; A851 Gr.1, 2; A935 Gr.45; A936 Gr.50. APl 5 L Gr. B, X42-X56 |
Redrying:
- Required at 300°C – 350°C for 2 hours
